6/13/2023 0 Comments Lst server serialNow you should have access to your Linux server through iLO remote console.į9 or F8 keys have to be switched with ESC+9 and ESC+8. On some systems, you may have to add the following line to /etc/inittab to get the login prompt on the console: s0:12345:respawn:/sbin/agetty -L 115200 ttyS1 vt100Īlso check ttyS1 is listed in /etc/securetty if you want to log in as root. Kernel /vmlinuz-2.6.18-164.el5PAE ro root=/dev/system/root Title Red Hat Enterprise Linux Server (2.6.18-164.el5PAE) Here is my nf file for instance: splashimage=(hd0,0)/grub/ Once Linux installed, edit /boot/grub/menu.lst or /boot/grub/nfĪnd add the following lines: # Setup serial (COM2) with baudrate 115200Īnd add console=tty0 (screen) console=ttyS1 (ttyS0 for COM1) to the kernel line. We now need to send kernel messages to the serial interface in Grub, the boot loader. Set the iLO parameters that suit your network and fill in user details. Right after BIOS messages have disappeared, press F8 to configure iLO. Selecting COM1 only redirects the output on to the screen in the slow serial mode fashion. Set ‘BIOS Serial Console Baud Rate’ to 115200 While booting up, press F9 to go in the BIOS Setup It provides interesting features such as remotely powering the server on and off.īut it is also possible to access Linux iLO remote console and reboot in single mode from a remote network. ILO is a management interface supporting SSH, available on HP Proliant servers.
0 Comments
Leave a Reply. |